The HQP40G-PSM-IR4 is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical module. It provides increased port density and total system cost savings. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3125Gbps operation for an aggregate data rate of 41.25Gbps 2km of single mode fiber.
An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.
The module operates with single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
The HQP40G-PSM-IR4 design is compliant to QSFP+ Multi-source agreement (MSA) in terms of form factor, optical/electrical connection and digital diagnostic interface. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module can be managed through the I2C two-wire serial interface.
+ Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4 Standard
+ QSFP+ MSA compliant
+ Up to 11.2Gb/s data rate per wavelength
+ 4-channel 1310 FP laser
+ Up to 2km transmission on single mode fiber (SMF)
+ Operating case temperature: 0 to 70 ℃
+ Maximum power consumption 3.5W
+ LC duplex connector
+ RoHS compliant
+ 40GBASE-IR4 Ethernet Links
+ Infiniband QDR and DDR and SDR
+ Client-side 40G Telecom connections
||QSFP+40GB-PSM-IR4 SMF 1310nm 2KM