HQP00G-CWDM-LR4 is a transceiver module designed for low cost 10km optical communication applications. The module converts 4 inputs channels (ch) of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 100Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 10km fiber transmission.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
+ 4 CWDM lanes Mux/De-mux design
+ CWDM TOSA integrated Driver
+ Build in CDR on both TX and RX
+ Up to 25.78Gbps Data rate per wavelength
+ Up to 10km transmission on single mode fiber (SMF) with RS-FEC
+ Electrically hot-pluggable
+ Digital Diagnostics Monitoring Interface
+ Compliant with QSFP28 MSA with LC connector
+ Case operating temperature range:0°C to 70°C
+ Power dissipation < 3.5 W
+ Data Center
+ 100G Ethernet
+ 100G Campus Link
+ Enterprise networking
+ Compliant to IEEE 802.3ba and 100G CLR4/CWDM4
+ Compliant to SFF-8636
+ RoHS Compliant.
|| QSFP28 100G CWDM4 SMF 10KM